This 11 Position Switch is very helpful for adjustable TC-Settings, which can be changed during riding.
The usual adjustment (once you found out your best personal Wheel-slip adjustments) of this Switch is No.6 which is 0% Change of Slip adjustments.
And then you should determine -5% to +5% of Slip in 1% Steps which useful to correct a worn or an other Tire or to adjust the TC for rain, or maybe different grip-Levels of the ground.

Generally this Switch is also very useful to find out your individual Slip Adjustments at all at the beginning of your TC Setup.



Delivery Content:
- 11 Position switch including Deutsch DTM Plug
- Electrical Connection Sheet

BIKE	PRICE (EXCL. VAT)	PRICE (INCL. VAT)	QUANTITY
All makes and models	€ 184.03	€ 219.00

Moreless same as the 11 Pos Switch ... just with 10 Positions.

Including Motec Calibration Table which does cover 9 Positions, and/or my own Table which does cover all 10 Positions.

BIKE	PRICE (EXCL. VAT)	PRICE (INCL. VAT)	QUANTITY
All makes and models	€ 150.42	€ 179.00

61 Wires different colours.

- Each 0.34mm²
- lateral marked , way better "readable" than std.Motorcycle Wires
- including. Motec M400-M880 Pin assignment recommendation List

Delivery Content:
4 meter of 61 different marked 0.34mm² wires, means 244 Meters of Wires !

BIKE	PRICE (EXCL. VAT)	PRICE (INCL. VAT)	QUANTITY
All makes and models	€ 114.00	€ 135.66

This is definitely the most sophisticated Shift- and general Purpose Light Module worldwide available - the Motec SLM.
The SLM provides 8 general purpose, multicolour LED lights controllable over a CAN bus.

Colour and intensity can be controlled independantly and a set of patterns defined in a priority order. That way, for example, a warning light can override a shift light.



The SLM can be controlled from an ADL2, ACL, SDL or hundred series ECU. All of these have special programming functions for the SLM, so it is no longer necessary to assign a single light to each output. This allows outputs to be used for other functions while providing greater flexibility in using the available LEDs.

BIKE	PRICE (EXCL. VAT)	PRICE (INCL. VAT)	QUANTITY
All makes and models	€ 312.00	€ 371.28

A small piece which makews life easy.
Mount that unit at an exposed area at your Bike, and connect it with the CAN-Bus of the Motec ECU or Dashlogger.
Then you only have to plug in the UTC to read out the Data.
Easy on/off through a push-button to release the UTC.

BIKE	PRICE (EXCL. VAT)	PRICE (INCL. VAT)	QUANTITY
All makes and models	€ 17.53	€ 20.86

This Motec Unit allows communication beetween PC/Laptop USB Hub and the Motec ECU, which has a CAN-Bus.
The UTC is necessary to get logged Data and to commmunicate at all with M400 or M800, or the ADL/SDL/EDL Dashloggers.
Delivery content:
- UTC Module - USB to UTC Cable

BIKE	PRICE (EXCL. VAT)	PRICE (INCL. VAT)	QUANTITY
All makes and models	€ 201.20	€ 239.43