ENGLISH    DEUTSCH


Sensor Quickshift
Quickshift Sensor with adjustable preload
A real thought twice made Sensor matching most Quickshift-Systems.
Due to the clever design there are nice facilities, as:
- useable as PUSH or PULL Sensor - adjustable preload FORCE - adjustable preload STRETCH

Power supply: 5-12V
Open Collector Signal Output
Delivery including Sensor w/cable 1,5m and Tyco/AMP Plug.
I use the Tellert-Sensor/Quickshift Mechanism since 10 years, and I estimate it for one of the best Solutions on Market, due to the preload-facility, which can decrease the Ignition/Injection Time-out down to 40ms.


BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
All makes and models € 175.00 € 208.25
    

Sensors Temperature
Exhaust Gas Temp Sensor - fast response
Fast response K-Element EGT Probe, with compression fitting, which can be welded onto the header.
Recommendet Distance from Outlet ~ 2"
  • Inconel 600 sheathing
  • Response time (500 milliseconds)

  • Reading Maximum : 2200 F ( 1200 °C)




    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 66.39 € 79.00
        

    Sensors Suspension
    Front Suspension / Steering Angle Sensor 150mm IP66
    P&G Linear Displacement Sensor, as used by all major Teams in WSBK and MotoGP.
    • 150mm Stroke
    • IP66 Sealing
    • high Precision ball joint mounting for M5 Screws
    • Repeatability : less than 0.01mm !
    • Shaft seal Life : 20 million Operations
    • Linearity typical : +/- 0.07 %
    • 1 Meter output Cable
    • Electrical output : min 0.5 to max. 99.5% of applied Volts

    Can be used in conjunction with all Data-Loggers (Motec ,PI , Marelli , AIM, TEAC.... whatever you have.
    High Precision and Durability to rely on in case you like to built Traction Control by Influence of Suspension Positions or Velocities.

    Suspension Sensors are a great help, as they allow you to see a lot ( partially depending on Logging Analysis Software ):

    1. Which range of Fork - and Shock travel I do use at all ?
    2. How often the Suspension has been at it's limits of working travel , or
    3. is my Suspension too stiff and I'm far away from using the full capability of the Suspension ?
    4. do I loose or do I win Traction at Acceleration out of the Corner ( check the Shock movement ) ?
    5. What are the maximum velocities front and rear Suspension, do they work in a similar Window ?

    Electrical Connection:
    - Red : +5V ( preferably )
    - Black : Ground
    - Yellow : Signal

    Delivery Content :
    P&G 150mm IP66 Linear Displacement Sensor with 1m Cable .



    A Recommendation is to use this Sensor also ( additional ) as steering angle Sensor, which might be very helpful for calibration and supervising of Sensors ( safety Issues ), aswell as maybe to have some small Influence in Traction Control.

    Most MotoGP Bikes ( as here the Desmosedici from Stoner ) do have this Sensor mounted next to the steering damper.






    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 293.80 € 349.62
        

    Sensors Suspension
    Rear Shock / Steering Angle Sensor 75mm Stroke - IP66 !
    P&G Linear Displacement Sensor for the rear Suspension, as used by all major Teams in WSBK and MotoGP.
    • 75 mm Stroke
    • IP66 Sealing
    • high Precision ball joint mounting for M5 Screws
    • Repeatability : less than 0.01mm !
    • Shaft seal Life : 20 million Operations
    • Linearity typical : +/- 0.07 %
    • 1 Meter output Cable
    • Electrical output : min 0.5 to max. 99.5% of applied Volts

    Can be used in conjunction with all Data-Loggers (Motec ,PI , Marelli , AIM, TEAC.... whatever you have.
    High Precision and Durability to rely on in case you like to built Traction Control by Influence of Suspension Positions or Velocities.

    Suspension Sensors are a great help, as they allow you to see a lot ( partially depending on Logging Analysis Software ):

    1. Which range of Fork - and Shock travel I do use at all ?
    2. How often the Suspension has been at it's limits of working travel , or
    3. is my Suspension too stiff and I'm far away from using the full capability of the Suspension ?
    4. do I loose or do I win Traction at Acceleration out of the Corner ( check the Shock movement ) ?
    5. What are the maximum velocities front and rear Suspension, do they work in a similar Window ?

    Electrical Connection:
    - Red : +5V ( preferably )
    - Black : Ground
    - Yellow : Signal

    Delivery Content :
    P&G 75mm IP66 Linear Displacement Sensor with 1m Cable .



    A Recommendation is to use this Sensor also ( additional ) as steering angle Sensor, which might be very helpful for calibration and supervising of Sensors ( safety Issues ), aswell as maybe to have some small Influence in Traction Control.

    Most MotoGP Bikes ( I.E: the Desmosedici from Stoner, check the Pic ) do have this Sensor mounted next to the steering damper.





    But this short 75mm Stroke Sensor fits best for all next to topmount steering-damper positioning, as shown below.




    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 274.40 € 326.54
        

    Sensors Speed
    Durbahn Speed /TC Sensor with LED Control


    After some Research I found the electronically components, which meet my requirements, and I have build my own Sensor with Housing which I need for Traction Control .







    So now the TC-Sensor is done, with those Specs I wanted to have :

    1. Bandwidth 15 kHz
    2. Supply Voltage 3,5 to 24 Volt
    3. LED- Indication for Operating-Control
    4. Wire Exit sidewards
    5. Tolerable Distance to Object from 0,1 - 2.5 mm
    6. Working Temperature from -40°C to 150°C
    7. 17mm height
    8. No Magnets necessary to initialize the Signal
    9. Weight: 31gr. incl. 1 Meter Cable

    I've build this Sensor similar to what is in use at MotoGP and WSBK, and every Sensor I build is tested to meet the Specs.

    Because the Indication-LED needs different resistors depending on the supply Voltage, please use the comment field to let me know if you like to have the Sensor for 5 or 12 Volt Power supply, and I will build the Sensor up to your Specs.





    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 99.00 € 117.81
        

    Sensors Suspension
    Suspension Sensor Kit 150/75mm - IP66
    The complete Suspension Sensor Kit.

    Both Sensors which are mentioned on this Page , plus :
    - 2 Female miniature Bajonett Closure Connectors
    - 2 Male miniature Bajonett Closure Connectors
    - 2 3 Wire Signal Cables each 1.5 Meter




    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 574.20 € 683.30
        

    Sensors Temperature
    Infrared ( Tire-) Temp Sensor Type I
    Infrared Temperature Sensor with 2 sideward 4mm mounting Spots.
    Measuring Range (To) from -20°C to 340°C.

    I can program each sensor for desired range of reading within the Limits mentioned above.
    The Sensor comes standard with a measuring range between 0°C to +200°C ( so 32 to 392 Fahrenheit ).





    The Specs:

    1. Object Temp reading fom -20°C to 340°C
    2. Supply Voltage 5 Volt
    3. Horizontal mounting Spots
    4. Wire Exit sidewards
    5. Tolerable Distance to Object from 0,1 - 12cm
    6. Operating Temperature from -40°C to 80°C
    7. 17mm height
    8. Output Characteristics : PWM
    9. Measurement resolution of 0.01°C
    10. Resolution 0-120°C : 0.15°C
    11. Calibration Table for Motec ADL/EDL/ADL2 available (DIG or SPEED Inputs )
    12. Weight: 31gr. incl. 1.5 Meter Cable
    13. Automotive Grade



    14. BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
      All makes and models € 113.39 € 134.93
          

    Sensor Lambda
    Bosch Wideband Lambda Probe LSU 4.9
    Bosch Wideband Lambda Probe LSU 4.9.

    Very fast and accurate Lambda Probe- 5 wire. Suitable for all Motec Mx00 ECU's.
    Lambda-reading from 0.7 to 1.7 !



    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 106.56 € 126.81
        

    Sensors Temperature
    Infrared ( Tire-) Temp Sensor Type II
    This Sensor has the IR-Temp Detection at the bottom of the housing, so it allows a easy and fast mounting at huggers or fenders.

    Same technical Data as the IR Sensor Type I


    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 113.39 € 134.93
        

    GPS Module
    Motec GPS Module BL1

    MOTEC BL-1 GPS Module



     

    • 10 Hz Update-rate
    • ready to use with Motec ADL2, SDL, ACL
    • Baud-rate : 57600
    • high Accuracy
    • LED Indication for Power/ GPS receive
    • separate Antenna magnetic mount
    • Power supply: 5-15 Volt



    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 536.13 € 637.99
        

    Sensors Suspension
    Linear Suspension Sensor mounting Clamp

    Linear Suspension Sensor mounting Clamp

     

    • 2Pcs Assy - no removal of upper Triple necessary
    • 2 Different mounting Spots ( M5) for Sensor available

     Available ID's :

    • 53 mm
    • 54 mm
    • 56 mm
    • 58 mm

    Custom Clamps ( non listed ID's) available on special request

    Note: when you order please type the desired ID into the comment field

     

     




    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 100.00 € 119.00
        

    5 Volt Module
    High Accuracy 5Volt Module/ Converter - 7.5 A !

    High Accuracy 5Volt Module/ Converter - 7.5 A !

    • Power input 10- 30V
    • Power Output:
      Min : 4.950 V
      Typ: 5.000V
      Max: 5.050V
    • CNC Machined housing

    Most of the Motec devices have a 5V Aux Power supply, but the Motec 5V AUX Sensor Supply has only 0.15 Amps Max.

    So the Motec 5V Aux Output is sufficient for a couple of Sensors, but far not enough for "active" Sensors, as Infrared- (Temp or Distance), or Radar-Sensors,  GPS or 5V operating Stepper-Motors or similar or all together.
    So I build that 5V Aux Module with a 7.50 Amps linear-high Accuravy Transistor, which is powerful enough to cover the Power-Supply for all that mentioned Devices/Sensors in one Module.

    Also very useful for AIM-Dash Users, MXL, MXL pro who would like to use 5V operating Sensors/Devices for logging/displaying, such as:

    • Suspension Positions
    • Lean Angle
    • Brake Force
    • Fluid level Radar
    • Tire temp Sensors
    • Temp Sensors generally
    • GPS
    • G-Force sensors
    • Speed Sensors
    • Stepper Servos
    • etc.




    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 100.00 € 119.00
        

    Traction Control Trigger
    Traction Control / Speedreading TriggerBrakedisc RR - 40T
    For PVM-Racing Wheels:
    Brakedisc for Tractioncontrol/ Datalogging Speed/Wheelspin
    ... and of course for Braking too

    40 Impulses/Rev - 220 mm

    CNC machined Brakedisc forv High-Accuracy TC/Logging .
    A fixed Floater Version for reliable and TC System compatible Accuracy

    Wheelspeed and Wheelspin can be calculated and logged every driven 1" on ground !

    Weight : 1lbs
    ______________________________________
    For more and Custom TC-TriggerBrakediscs check the "Rotors-Iron" Section.
     




    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 251.26 € 299.00
        

    Traction Control Trigger
    Traction Control / Speedreading TriggerBrakedisc RR - 80T
    For PVM-Racing Wheels:
    Brakedisc for Tractioncontrol/ Datalogging Speed/Wheelspin
    ... and of course for Braking too

    80 Impulses/Rev - 220 mm

    CNC machined Brakedisc forv High-Accuracy TC/Logging .
    A fixed Floater Version for reliable and TC System compatible Accuracy

    Wheelspeed and Wheelspin can be calculated and logged every driven 1/2" on ground !

    Weight : 1lbs
    _____________________________________________________________________
    For more and custom TC-TriggerBrakediscs check the "Rotors-Iron" Section.
     




    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 251.26 € 299.00
        

    Sensor Lean Angle
    IR- Lean Angle Sensor IP 67

    Infrared Lean Angle Sensor

    High-Accuracy Distance Detection between Bike and Ground.
    As the lean Angle is depending on that Distance the Sensor will indicate the lean Angle very precise.


    Preferred mounting Spot: front or rear, near the Front Wheel Axle ( 30 cm/6.6 lbs) from Ground
    Best Angle of mounting : ~65° relative to Ground
    Voltage supply : 5 Volt
    Voltage Output : ~ 0,8 - 1.8 Volt ( 0-60° lean Angle)
    Protection class : IP 67
    Cable length: 1.5 Meter
    Delivery including Calibration-Table and 2 Binder 3-Wire bayonet joint Connectors


    Suitable for all Data-Recording Systems/ ECU's/ Dashes, which do have an Aux Voltage Input, as :

    • Motec ( Mxxx /ADLx/SDL /ACL.. etc )

    • AIM-Dashes

    • AFR-Tuner

    • 2D

    • Magneti Marelli

    • Bosch

    • etc.

    More Information on Durbahn Motorcycle Electronics/LeanAngle




    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 125.21 € 149.00
        

    Traction Control Trigger
    Traction Control / Speedreading TriggerBrakedisc RR - 40T inside grooved
    For most OEM and aftermarket Wheels:
    Brakedisc for Tractioncontrol/ Datalogging Speed/Wheelspin Calculation
    ... and of course for Braking too
     
    • 40 Impulses/Rev 
    • 210 mm - 240 mm available
    • CNC machined
    • inside grooving
       

    Brakedisc for High-Accuracy TC/Logging .
    A solid but very lightweight Version for reliable and TC System compatible Accuracy
    Preferably used for all Wheels which have a bolt pattern of 120mm and more

    Wheelspeed and Wheelspin can be calculated and logged every driven 1" on ground !

    Weight : 1,1 lbs

    To be done by Draft , Thickness from 3.5 to 4 mm

    Drafts available at present for OEM Wheels ( or aftermarket with similar bolt-Pattern ):

    • Ducati Desmosedici 220 mm
    • Ducati Desmosedici 240 mm
    • Yamaha R6 08/09
    • Honda CBR600 04-09
    • Honda CBR1000RR 04-09
    • RC51/Honda SP

    ____________________
    For more and Custom TC-TriggerBrakediscs check the "Rotors-Iron" Section.




    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 209.24 € 249.00
        

    Sensor Quickshift
    Force programable Quickshift-Sensor Push/Pull

    Programmable Quickshift Sensor.

    This Quickshift Sensor can be integrated into the Shift rod, and you don't have to care if the Application is Push or Pull.
    The Programmability of Shift force works in both Directions.







    Specifications:

    No Load Voltage: 2.450 V to 2.550 V
    Input Voltage : 5.00 V
    Max Voltage Push : 0.5 V
    Max Voltage Pull : 4.5 V
    Max Force Push/Pull : 20kN
    Housing: Aluminum CNC machined, anodized.
    Push/Pressure Rod: Titanium
    Recommended Push/Pull Voltage 1,7/3.3 Volt

     

    Delivery including 1 Meter Cable and wiring Instructions.

    Perfect for Programmable (AT/Switch ) Input sources for ECU's as  Motec, Bosch, Marelli... etc

     




    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 242.85 € 288.99
        

    Motec Starter Kit
    Basic Electronics Starter Kit

    Basic Motorcycle Electronics Starter Kit.
    Designed to be used in conjunction with Motec SDL/ADL2 and M400/M800.









    Content:

    • 2 Lean Angle Sensors ( Connector AS Micro Ultra)
    • 3 Tyre Temp Sensors ( Connector AS Micro Ultra)
    • 1 Quickshift Sensor bidirectional Operation ( Connector AS Micro Ultra)
    • 1 P+G Suspension Sensor FR ( Connector AS Micro Ultra)
    • 1 P+G Suspension Sensor RR ( Connector AS Micro Ultra)
    • 2 Drive Speed Sensors  ( Connector AS Micro Ultra)
    • 1 Ground Speed Sensor ( Connector AS Micro Ultra)
    • 1 11 Position Switch ( Connector AS Micro Ultra)
    • 2 10 Position Switches ( Connector AS Micro Ultra)
    • 1 5 Volt High-Amp Auxiliary Module ( Connector AS )
    • 1 BL1 GPS Module 10Hz incl. Antenna ( Connector AS Micro Ultra)
    • 1 SLM -Shift light Module ( Connector AS Micro Ultra)
    • 2 4.9 Bosch Lambda Sensors  ( Connector AS Mini )

    Including matching female AS Connectors ( not shown on the Picture)
    You can decide where you need Flange or flying female Connector Type, and for Micro Ultra Connector Types you can choose colors:

    1. Red
    2. Blue
    3. Green
    4. Yellow
    5. Orange
    6. Grey

    Crimping Service included: if you know the cable length you need all Sensors will be fitted with Connector.
    If you're not sure about cable length I'd me able to make Suggestions ( depending on where M800/ADL2/SDL is located )




    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 5,798.31 € 6,899.99
        

    Sensors Speed
    Durbahn Speed /TC Sensor flat Type/LED for Ducati

    Lightweight Ducati/Aprilia flat Type direct replacement Speed Sensor.

    Including LED Operation Control !

    Fits most Ducati and Aprilia Models, as:

    - RSV Mille
    - 748/996/998/999..... etc. Ducati
    - Desmosedici

    Can of course also be used on all other Motorcycles.
    Data:

    1. Bandwidth 15 kHz
    2. Supply Voltage 3,5 to 24 Volt
    3. LED- Indication for Operating-Control working from 5-15 Volt
    4. Wire Exit side wards
    5. Tolerable Distance to Object from 0,1 - 2.5 mm
    6. Working Temperature from -40°C to 150°C
    7. 22mm height
    8. No Magnets necessary to initialize the Signal
    9. Weight: 34gr. incl. 1 Meter shielded Wire





    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 109.00 € 129.71
        

    Traction Control Trigger
    Brake disc with reader slots for Tractioncontrol 220mm - latest PVM Wheels
    Similar to the ISR 40T grooved front Disc, but just for the Rearwheel. Available in 200-220 mm.

    The shown Version here is the "non-floating" one, which always makes sense when the mounting spots are close to the Friction-Surface.

    But because ISR is producing all his Discs on special order allow 4-6 weeks for delivery.

    Please use the "comment field" inside the order Procedure (next step), to submit Make,model and year of your bike.

    Weight:450 gr. (0.99 lbs)

    Suits most of the latest PVM Racing Wheels with 3-Bolts attached Disc.


    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 209.24 € 249.00
        

    Traction Control Trigger
    Traction Control / Speedreading TriggerBrakedisc PVM
    Same Features as the other TC-Brakediscs, designed for PVM Wheels.
    Fits PVM 6 or 3-Bolt Pattern Wheels.

    220mm narrow Band, 40 Grooves, and only 500 gr.!
    Designed to fit my rearbrakes or similar, Friction-height 27mm


    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 209.24 € 249.00
        

    Sensors Speed
    Speed/TC Sensor Compact with LED Control
    New single mounting spot compact designed Speed sensor, with LED Indication .










    Specification :

    1. Bandwidth 15 kHz
    2. Supply Voltage 3,5 to 24 Volt
    3. LED- Indication for Operating-Control ( works from 5 to 15 Volts Input voltage)
    4. Wire Exit sidewards
    5. Tolerable Distance to Object from 0,1 - 2.5 mm
    6. Working Temperature from -40°C to 150°C
    7. 17mm height, 27mm with
    8. No Magnets necessary to initialize the Signal
    9. Weight: 31gr. incl. 1 Meter Cable

    I've build this Sensor similar to what is in use at MotoGP and WSBK, and every Sensor I build is tested to meet the Specs.



    Works in conjunction with close all OEM and aftermarket ECU's and dashes, as i.E. Motec, Marelli,AIM.... etc.


    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 99.00 € 117.81
        

    GPS Module
    Garmin 5 Hz Mouse

    Garmin 5Hz GPS Mouse

    This GPS Unit has a even higher Sensitivity than the BL1, because the Garmin GPS does receive Satellites inside the Box, means indoors.
    Sometimes very useful for a coldstart on new Tracks, you do not need to move the bike outside to get the new Position.

    Compact Design, Electronic and Antenna in one.

    Programmed to work together with Motec ECU's ( M400-880) and Dashlogger ( ADL2, SDL, ACL, EDL)

    As the cable is "overlong" I offer a cut and connect Service, just give me your desired length of cable, and I will cut it there, and provide the unit with a connector (and add matching free female).


    Technical Data:

    Update Rate : 5 Hz
    Input voltage : 5 Volt
    Current : ~ 60 mAh
     

     




    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 293.27 € 348.99
        

    Traction Control Trigger
    Traction Control / Speedreading TriggerBrakedisc PVM- bis 2007
    Same Features as the other TC-Brakediscs, designed for PVM Wheels.
    Fits PVM 6 Bolt Pattern Wheels.

    220mm narrow Band, 40 Grooves, and only 500 gr.!



    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 209.24 € 249.00
        

    Switches
    GP Switch Unit Left

    Left Handlebar GP-Switch-Unit.
    Used by many Teams, also WSBK, SSP etc.

    3 Switches
    2 Buttons







    CNC machined, black anodized, including mounting instructions.

    Customizable Buttons, Button-colors and engravings possible (with charge ).

    Please use the comment field if you want a different Version then shown on the Picture.






    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 279.41 € 332.50
        

    Switches
    GP Switch Unit Right
    Rocksolid Run/Start switch.

    - IP 67 Waterproof
    - CNC machined from T 7075
    - black anodized


    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 159.41 € 189.70
        

    Switches
    GP Switch Unit Set
    Contains both, left and right side.


    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 409.41 € 487.20
        

    Sensors Speed
    Speed/TC Sensor Miniature with LED Control
    New miniature Speed sensor,diameter 10 mm !
    With LED Indication !!








    Specification :

    1. Bandwidth 15 kHz
    2. Supply Voltage 3,5 to 24 Volt
    3. LED- Indication for Operating-Control ( works from 5 to 15 Volts Input voltage)
    4. Tolerable Distance to Object from 0,1 - 2.5 mm
    5. Working Temperature from -40°C to 150°C
    6. 25mm height, 10mm Diameter
    7. No Magnets necessary to initialize the Signal
    8. Weight: 31gr. incl. 1 Meter Cable

    I've build this Sensor similar to what is in use at MotoGP and WSBK, and every Sensor I build is tested to meet the Specs.



    Works in conjunction with close all OEM and aftermarket ECU's and dashes, as i.E. Motec, Marelli,AIM.... etc.


    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 109.00 € 129.71
        

    Cable stripper
    Cable Stripper - Weidmueller Stripax
    The perfect Tool for stripping of wires, from 0,08mm up to 10mm(AWG 28 - 7 ).

    - Light
    - easy handling
    - reliable
    - the new 2010 upgraded Version


    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 67.14 € 79.90
        

    Sensor- Information
    Sensor-Info


    Unveil problems,yourself, your Bike.

    As most what Sensors can unveil is mentioned Inside the Electronics-Intro, I want to list here the most common Sensors more detailled, and also want to demonstrate, that wiring and integration of sensors is probably easier, than most might think.
    Of course a wide range of sensors make only sense in combination with Dashes and/or Data-Loggers.


    A wide range of Sensors is designed for Industry-Applications, they mostly have a Ampere Output range from 0- 20mA, which is not suitable for most dashes and loggers or general process-Control of electronic Motorcycle-Devices. So I have focussed all sensors, which are easy to calibrate, sensors, which already come with a datasheet, means I.E. Voltage/pressure , Voltage/Heat... and so on. Most work inside some kind of " TTL environment ", with output Voltages between 0.5-4.5 Volt , and supply voltages between 5 and 15 Volt. Some need to be resistant to aggressive media such as hydraulic Fluids or gasoline, they all need to be highly shock-resistant, accompanied by high accuracy and a internal temperature Compensation, to work proper in different ranges of Temperatur ( usually sufficient here is a range from 0-80 °C ), low Hysteresis values with high repeatability.
    Addittional I have a closer look to extensions and weight, but If I have to choose I prefer a more accurate heavier sensor more than an " inaccurate" light one. and also ( as very Miniature Sensors I.E. for Brakepressure can cost easily 1000 euros each) I try to go for a reasonable Mix between Costs and Extension of a Sensor , because that can save a couple of thousands of $ or €, which is better spend somewhere else.
    As far as I see it most of these Sensors have a very simple electrical Connection, they need a ground , a Power supply , and the 3rd connection is the output, which you can lead into a Logger , Dash or ECU....... or into all three .
    And - especially for Motorcycles you don't have to fear a infinite Number of Sensors, far not as much as maybe a Formula 1 Car.

    The aftermarket Sensors:
    - Lambda sensor(s)
    - Suspension linear sensors
    - Wheel Speed Sensors
    - IR- Sensors for Heat ( Tires, etc)
    - Exhaust Gas Temp sensors ( K-elements)
    - Fuelpressure Sensor
    - Brake/Clutch/Oilpressure Sensor
    - (Fuel) Temp Sensors
    - Angle sensor mechanical ( for cable clutch levers )
    - gear detection Sensor
    - quickshift Sensor

    Already inbuild in most/all modern Bikes ( so able to monitor too )
    - TP Sensor
    - MAP sensor
    - Water Temp sensor
    - Airbox pressure sensor
    - Air(box inside) Temp Sensor
    - Speed sensor
    - Oilpressure switch on/off
    - Neutral Switch on/off
    - gear Indication Sensor

    Easy but Important to monitor for Motorcycles without Alterntor = Voltage of Battery


    So this section here has far not grown to a level, where I could offer every sensor. Believe me, it's a hard Job sometimes to source the most suitable for a bike.
    But step by step you'll find more and more here !



    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 0.00 € 0.00
        

    RPM-Signal-Generator
    Coil to DIG Generator
    Most modern Bikes do no longer deliver a clear Digital RPM Signal, which can be hooked up for aftermarket Dashes like AIM, or Motec or similar, to display the RPM.

    Also for Datalogging - meanwhile it is really complicated or close to impossible to implant a RPM Signal into Logging Devices, if the ECU is still stock, because lot of stock ECU's RPM to Dash Outputs are CAN-based or do have a integrated digital Signal, which is only recognized by the OEM Dash.

    So this little Electronic Board helps you out - it is converting the Signal going to the Coil into a clear Digital Signal, which every Datalogger or aftermarket Tach is able to read.


    Power Supply: 12V (red) Signal Input: yellow Ground: brown Signal Output: black


    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 77.80 € 92.58
        

    Sensor Quickshift
    EVO Quickshift Sensor Type I

    PUSH+PULL Spring preloaded Quickshift Sensor.

    This Quickshift Sensor can be integrated into the Shift rod, and you don't have to care if the Application is Push or Pull.
    The Specialty of this Sensor is the clear precise Signal Output at 20KG (both Directions), which makes it suitable as replacement or upgrade Part for close to all aftermarket Quickshift Systems.
    And of course also as stand alone Quickshift Sensor for ECU like Ignijet, Ignitec, MoTeC,Marelli,Haltech...etc.







    Specifications:

    No Load Voltage: 2.450 V to 2.550 V
    Input Voltage : 5.00 V or 12 V
    Push/Pull Signal Output at : 20Kg
    Housing: Aluminum CNC machined, anodized.

    Delivery including 1 Meter Cable + mating Connector and wiring Instructions.




    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 267.00 € 317.73
        

    Sensors Pressure
    Miniatur Pressure Sensor 0-10 Bar
    High Precision Pressure Sensor, ratiometric and Temperature compensated.

    This Stainless Steel Pressure Sensor is perfect to monitor (Datalogging) and to Control Pressure of:
    - Fuel
    - Water
    - Oil
    - and even Air ( at Turbocharged Systems)




    Reads important Values for Datalogging, or Compensations like Fuelpressure/Airpressure Comp (at free programable ECUS)... indicates blown Head-Packages when used as Waterpressure Sensor - etc.

    Specifications:
    - Power Supply: 5V
    - Output @ 0 Bar: 0,5V
    - Output @ 10 Bar: 4,5V
    - Thread: M10x1mm
    - Stainless Steel, Saltwaterproof
    - 1,5 Meter Cable
    - Lenght: 40mm - Diameter: 13 mm




    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 209.00 € 248.71
        

    Traction Control Trigger
    Traction Control / Speedreading Triggerdisc Universal
    Very light Steel/Fibre Matrix TC/Speed Trigger Wheel Universal, to be attached to the front disc or rear, if applicable.

    Available Sizes in mm:
    - 122
    - 145
    - 160




    Same Style as what they often use in GP or WSBK, but with the difference, that there are no magnets bond in.
    Found a different and more flexible Solution, which is using a ultrathin lasered Steel Triggerwheel, which is located inside the Fibre-Matrix.

    Offset 10mm.
    Flexible regarding numbers of Triggers.
    40 Impulses/Revolution ! !
    Means reading Speed every 2.5 cm on Ground !

    Designed for Traction Control and/or ultra-accurate Speedreading.
    A perfect Solution in conjunction with CMC or standard Brakediscs.

    Please -when you order- use the comment field for the desired Diameter


    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 139.00 € 165.41
        

    Sensor Quickshift
    EVO II Quickshift Sensor
    The brandnew EVO II has all the features of the EVO Quickshift Sensor, but additional:
    - LED Indication
    - outside adjustability if push or pull
    - outside adjustability for Output HI or LO
    - outside adjustability of the force, where shift signal is generated. You can choose 17, 20, 23 or 26 kg load to create the shift-Signal.

    This feature is helpful especially to adjust the force relative to the lever arm of the rearsets, which is different from Bike to Bike, and from rearset to rearset.


    BIKE PRICE (EXCL. VAT) PRICE (INCL. VAT) QUANTITY
    All makes and models € 314.00 € 373.66